Basic details of heat shrink tubing with adhesive
- Classification:Company News
- Author:
- Source:
- Release time:2022-09-20
- Visits:0
[Summary]Heat-shrinkable tubing with adhesive is made of cross-linked polyolefin material and environmentally friendly hot-melt adhesive compound extrusion processing. That is, single-walled tube with hot melt adhesive on the inner layer.
Basic details of heat shrink tubing with adhesive
[Summary]Heat-shrinkable tubing with adhesive is made of cross-linked polyolefin material and environmentally friendly hot-melt adhesive compound extrusion processing. That is, single-walled tube with hot melt adhesive on the inner layer.
- Classification:Company News
- Author:
- Source:
- Release time:2022-09-20
- Visits:0
Heat-shrinkable tubing with adhesive is made of cross-linked polyolefin material and environmentally friendly hot-melt adhesive compound extrusion processing. That is, single-walled tube with hot melt adhesive on the inner layer.
Production process.
Co-extrusion: mixing - extrusion (co-extrusion) - irradiation (cross-linking) - expansion - packaging
Gluing process:
The difference between direct coating and co-extrusion: co-extruded products are beautiful, the glue layer is smooth, and not easy to fall off. But the co-extrusion process is complicated, at present, the large-size products less use co-extrusion.
EVA hot melt adhesive: a solvent-free, moisture-free 100% solid fusible polymer; it is solid at room temperature, heated and melted to a certain temperature into a molten state, and has a certain viscosity. EVA hot melt adhesive after melting, light brown or white. EVA hot melt adhesive consists of basic resin, tackifier, viscosity modifier and anti-oxidant components.
The significance of hot melt adhesive: waterproof sealing, mechanical strain cushioning.
Flame retardant characteristics: the outer layer is flame retardant, the inner layer of hot melt adhesive is not flame retardant.
Key indicators :
Sealing performance: double-walled tube has adhesive inside, so it can play a waterproof sealing effect.
Adhesive viscosity: different hot melt adhesive viscosity will be different, EVA hot melt adhesive for the most conventional hot melt adhesive.
Use temperature (different from single-walled tube): the normal use temperature of conventional double-walled tube should be lower than the melting temperature of hot melt adhesive.
扫二维码用手机看
Copyright © 2020 Suzhou Feibo Cold and Heat Shrinking Co., Ltd. 苏ICP备20001247号-5 Powered By 300.cn