language
中国
韩国
韩国
韩国
韩国
韩国
News

What are the production processes of cold shrink cable heads

  • Classification:Company News
  • Author:
  • Source:
  • Release time:2023-02-15
  • Visits:0

[Summary]Cold shrink cable heads are made of silicone rubber through a series of special processing techniques. The finished product is convenient, and can be operated without the use of heating tools.

What are the production processes of cold shrink cable heads

[Summary]Cold shrink cable heads are made of silicone rubber through a series of special processing techniques. The finished product is convenient, and can be operated without the use of heating tools.

  • Classification:Company News
  • Author:
  • Source:
  • Release time:2023-02-15
  • Visits:0
详情

Today we talk about the production of cold shrink cable heads. Before introducing , let’s talk about cold shrink cable heads first.
Cold shrink cable heads are made of silicone rubber through a series of special processing techniques. The finished product is convenient, and can be operated without the use of heating tools. 

cold shrink cable heads
Cold shrink cable heads of Suzhou Feibo Heat & Cold Shrinkable Products Co., Ltd. can be divided into 1kv, 10kv and 35kv according to the withstand voltage level. Among them, 1kv is suitable for the withstand voltage range from 0.6kv to 1kv, 10kv is suitable for the withstand voltage range from 8.7kv to 15kv, and 35kv is suitable from 26kv to 35kv. Different withstand voltage levels are suitable for different withstand voltage ranges, customers can choose according to their own applicable conditions.
Now that we have mentioned the withstand voltage level, we have to introduce 10kv and 35kv cold shrink cable heads. These two are products with high withstand voltage levels, and are divided into indoor and outdoor ones according to the usage. Indoor products are strictly prohibited to be used outdoors.
Before operating and installing cold shrink cable heads, we should choose a sunny day and operate on a good environment. Before operation, it is also necessary to confirm whether cold shrink cable heads have been checked in advance, which is completely consistent with the cable model specifications. After all of these checks are completed, the covered object can be installed according to the product installation manual attached by the manufacturer. The simple operation method is to put the covered object in the cold shrink cable heads and connect it with the cable. When adjusted to the most suitable position, gently extract the white plastic support bar, and cold shrink cable heads will be tightly wrapped together with the cable by its own high elasticity and achieve the effect of "same breathing" with the cable. 
The above briefly introduces some details of the production of cold shrink cable heads. Don't forget that after cold shrink cable heads are made, tidy up and clean the site.

Keywords:

扫二维码用手机看