What are the precautions for using Cheapest non-slip heat shrink tube!
- Classification:Industry News
- Author:
- Source:
- Release time:2021-08-06
- Visits:0
[Summary]The heat shrinkable tube is a special polyolefin material heat shrinkable tube. The outer layer is made of high-quality and soft cross-linked polyolefin material and the inner layer of hot melt adhesive. The outer layer has the characteristics of insulation, corrosion resistance and wear resistance, and the inner layer has low melting point, waterproof sealing and high adhesion, etc. advantage.
What are the precautions for using Cheapest non-slip heat shrink tube!
[Summary]The heat shrinkable tube is a special polyolefin material heat shrinkable tube. The outer layer is made of high-quality and soft cross-linked polyolefin material and the inner layer of hot melt adhesive. The outer layer has the characteristics of insulation, corrosion resistance and wear resistance, and the inner layer has low melting point, waterproof sealing and high adhesion, etc. advantage.
- Classification:Industry News
- Author:
- Source:
- Release time:2021-08-06
- Visits:0
The heat shrinkable tube is a special polyolefin material heat shrinkable tube. The outer layer is made of high-quality soft cross-linked polyolefin material and the inner layer of hot melt adhesive. The outer layer has the characteristics of insulation, corrosion resistance and wear resistance, and the inner layer has low melting point, waterproof sealing and high adhesion. advantage. So what should be paid attention to when using it? Follow the editor of Cheapest non-slip heat shrink tube to understand it briefly!
There are three common ways to heat the heat shrinkable tube: lighter, heat gun, and drying box.
The lighter is a common heating tool, but the external temperature of the flame reaches thousands of degrees, which is much higher than the shrinkage temperature of the heat shrinkable tube. Therefore, we must pay attention to moving back and forth when using the lighter to heat up. The overall shrink tube is symmetrical when exposed to heat, so as to avoid burning the heat shrink tube or make the appearance design of the heat shrink tube more and more unsightly.
The heat gun is a more technical and professional heating tool, but the temperature of the common heat gun can reach 400℃. When using the heat gun, the heat shrinkable tube will not be burnt, but you may need to shake the heat gun continuously. Make the heat shrinkable tube heat up as a whole to ensure the appearance design of the heat shrinkable tube after shrinking.
When the drying box is used, the normal shrinkage temperature of the heat shrinkable tube should be 125±5℃. When the temperature is higher than this temperature, if it is placed in the drying box irregularly, it may cause adhesion and cause the product to rot. Hole. Therefore, pay attention to the symmetrical sorting when heating the drying box, and do not need to pile them together to prevent the above problems.
The above is the editor of Cheapest non-slip heat shrink tube: a brief introduction to the relevant knowledge about the use of heat shrink tube.
扫二维码用手机看
Copyright © 2020 Suzhou Feibo Cold and Heat Shrinking Co., Ltd. 苏ICP备20001247号-5 Powered By 300.cn