language
中国
韩国
韩国
韩国
韩国
韩国
News

Cheapest non-slip heat shrink tube small class explanation: How to use heat shrink tube?

  • Classification:Industry News
  • Author:
  • Source:
  • Release time:2021-08-17
  • Visits:0

[Summary]Heat-shrinkable tube is an indispensable insulating protective tube in the modern electronic and electrical industry and power cable industry. It has the characteristics of high-temperature shrinkage, fast shrinkage, and simple operation. Although the surface of the heat-shrinkable tube is soft, it also has a certain degree of toughness. , Abrasion resistance, insulation and waterproof effects.

Cheapest non-slip heat shrink tube small class explanation: How to use heat shrink tube?

[Summary]Heat-shrinkable tube is an indispensable insulating protective tube in the modern electronic and electrical industry and power cable industry. It has the characteristics of high-temperature shrinkage, fast shrinkage, and simple operation. Although the surface of the heat-shrinkable tube is soft, it also has a certain degree of toughness. , Abrasion resistance, insulation and waterproof effects.

  • Classification:Industry News
  • Author:
  • Source:
  • Release time:2021-08-17
  • Visits:0
详情

Heat-shrinkable tube is an indispensable insulating protective tube in the modern electronic and electrical industry and power cable industry. It has the characteristics of high-temperature shrinkage, fast shrinkage, and simple operation. Although the surface of the heat-shrinkable tube is soft, it also has a certain degree of toughness. , Abrasion resistance, insulation and waterproof effects. So do you know how to use it? Let’s follow the editor of Cheapest non-slip heat shrink tube to have a simple understanding!
1. Prepare the material, first understand the diameter of the covered object, or calculate the corresponding diameter from the length and width, and choose a heat shrinkable tube with a diameter slightly larger than the diameter of the cable.
2. Remove the burrs and sharp corners on the cable to prevent cracking caused by piercing the heat shrinkable tube during the retracting process. It is necessary to use a quick-drying cleaning agent in advance to clean the oil and impurities on the connection part of the covered material and keep it clean.


3. Calculate the length to be wrapped and cut the heat shrinkable tube of the corresponding length. When cutting the heat sink tube, the cut should be neat and smooth, and no burrs or cracks should be produced, so as to avoid the stress concentration generated during heating and shrinkage and spreading along the cracks.
4. Put the heat-shrinkable tube into one end of the covered material, and move the covered heat-shrinkable tube to a suitable position. For bent cables, arrange the heat-shrinkable tube at the corners to prevent wrinkles.
5. The heating tool generally uses a heat gun, oven or hair dryer. During the heating process, it should be heated from left to right or from right to left in a single direction. It can also be heated from the middle to both ends to avoid air staying in the heat shrink tube and shrinking. The cable should be wrapped tightly afterwards, and the heating should not be too close to the surface of the casing or concentrated in one place, otherwise it will cause uneven thickness or burn the casing.
The above is the editor of Cheapest non-slip heat shrink tube: a brief introduction to the use of heat shrink tube.

Keywords:

扫二维码用手机看