How much do you know about the shrinkage steps and precautions of cold shrinkable tubes? Low price EPDM cold shrink tubing Xiaobian will take you to a brief understanding.
1. Unpack the bag and check whether there are cracks, holes and other defects on the surface of the cold shrinkable tube to ensure that the quality is qualified before shrinking.
2. Find the stretching head of the cold-shrinkable tube support strip. The place where the bending inward is the first place to shrink, the stretching head is on the opposite side, find it, and gently take it out to prepare for stretching.

3. Insert the cold-shrinkable tube into the object to be shrunk, align one end of the shrinking end with the position to be shrunk, pull out the support bar slowly and evenly, and try to keep the cold-shrinkable tube shrinking evenly and naturally. Do not bend the cold-shrinkable tube deliberately, and keep it straight. It is also necessary to avoid the support strip pulling the silicone tube and causing the cold shrink tube to crack.
4. After shrinking the cold-shrinkable tube, check the installation quality, whether the two ends are in the correct position, and whether there are other defects on the surface of the cold-shrinkable tube, preferably it is still in a smooth state. Finally, the packaging bag garbage is collected and cleaned up on site. If the amount is large, the support strips should be kept as clean as possible. High-quality support strips can be recycled.
The above is the low price EPDM cold shrink tubing small series: a brief introduction to the knowledge about the shrinkage steps and precautions of cold shrink tubing.